Modifications/Changes/Spare Parts; Stoppages - Conel CLEAR 2.0 RD Montage- Und Betriebsanleitung

46
7.8

MODIFICATIONS/CHANGES/SPARE PARTS

Only original spare parts are to be used!
Arbitrary modifications and changes are prohibited for safety reasons! They can
impair the function of the domestic water station, lead to leaks and as an extreme
incident they can lead to the bursting of the domestic water station.
The imprinted test marks are only valid if original spare parts are used.
7.9

STOPPAGES

If a domestic water station has to be removed from the flange or unscrewed, the following
notes must absolutely be observed:
/ Protect the flange surfaces from damage! Damaged flange surfaces cannot close tight any longer. As a
result, escaping water can damage the building and installations.
/ Ensure that no dirt can get into the domestic water station! This dirt can get into contact with and be
discharged into the drinking water when the domestic water station is switched back on. The health of
persons who drink dirty water is at risk.
/ Store the domestic water station in frost-free conditions! Frost can cause any water contained in the
domestic water station's voids to freeze and thus cause mechanical damage to the domestic water sta-
tion so that it leaks at operating pressure or can burst. Leaking water can cause major damage to the
building. In addition, persons near the domestic water station can be injured by breaking off filter parts.
/ When restarting the domestic water station, follow the instructions for a new domestic water station.