Technical Data; Accessories - Conel CLEAR 2.0 RD Montage- Und Betriebsanleitung

52
11

TECHNICAL DATA

The following applies for all the models of the device:
/ The water to be filtered must conform to the European Drinking Water Regulations!
Technical data
Connection diameter nominal
Nominal flow rate to DIN EN 1567
Backwashing volumetric flow
Nominal pressure
Operating pressure
Adjustable discharge pressure
Factory setting
Mesh size
lower mesh width
upper mesh width
Water and ambient temperature
Fitting length with screw connection
Fitting length w/o screw connection
Threaded connection according to
Weight
1) Applies for a completely opened flushing water valve and 2 - 3 bar (
11.1

ACCESSORIES

/ Clear 2.0 Automatic controls retrofit kit. For subsequent upgrade of the manual domestic water sta-
tion to an automatic domestic water station.
/ Clear 2.0 SAFE. Central water monitoring system for installation between built-in rotary flange and
domestic water station. For monitoring the water consumption and shutting off the water pipe when
adjustable limits are exceeded. Protects against the effects of water pipe bursts, leakages, defects on
the domestic water installation and unusually high water consumption. Detects leaking taps and
valves.
CLEAR 2.0 RD ¾"
DN 20
2.3 m³/h
1)
approx. 0.3 l/s
PN 16
1.5 - 16 bar
(150 - 1600 kPa)
1.5 - 6 bar
(150 - 600 kPa)
4 bar
(400 kPa)
0.1 mm (100 μm)
0.095 mm (95 μm)
0.125 mm (125 μm)
max. 30 °C (86 °F)
180 mm
100 mm
DIN EN 10226-1
3.7 kg
CLEAR 2.0 RD 1"
DN 25
3.6 m³/h
approx. 0.3 l/s
PN 16
1.5 - 16 bar
(150 - 1600 kPa)
1.5 - 6 bar
(150 - 600 kPa)
4 bar
(400 kPa)
0.1 mm (100 μm)
0.095 mm (95 μm)
0.125 mm (125 μm)
max. 30 °C (86 °F)
195 mm
100 mm
DIN EN 10226-1
3.8 kg
200 - 300 kPa
) mains pressure.
CLEAR 2.0 RD 1¼"
DN 32
5.8 m³/h
approx. 0.3 l/s
PN 16
1.5 - 16 bar
(150 - 1600 kPa)
1.5 - 6 bar
(150 - 600 kPa)
4 bar
(400 kPa)
0.1 mm (100 μm)
0.095 mm (95 μm)
0.125 mm (125 μm)
max. 30 °C (86 °F)
230 mm
110 mm
DIN EN 10226-1
4.3 kg