Beko CEG5331X Bedienungsanleitung Seite 23

5
Cleaning
WARNING: Keep skin/body away from the hot water.
8. When all the water in the water tank is being dispensed out,
be flashing. Remove all the remaining solution in the water tank and fill the tank with normal tap
water until the max position. When water is filled into the water tank,
appliance will continue the self-cleaning process.
9. When the self-cleaning process is completed, the appliance will switch off automatically.
5.3 Empty System Function
The empty system function is recommended to be used before long period of non-use, frost protection
and before talking to repair agent.
1. In standby condition, press and hold the
2. will then be flashing.
3. Remove the water tank from the appliance.
is under process. You can press
condition.
4. When the empty system function is completed, the appliance will switch off automatically.
WARNING: After perform EMPTY SYSYEM FUNCTION; press the hot water button until
water can come out from spout when the coffee maker is reused again.
5.4 Manual Rinsing
You can perform a manual rinsing cycle to clean the coffee nozzle after use. It is also suggested to
perform a manual rinsing if the appliance has not been used for a long period of time.
1. In standby condition, press and hold the
2. All button will then goes off. The coffee nozzle will then dispense a small amount of water which is
used for the rinising.
WARNING: Water comes out of the coffee nozzle is hot and is collected in the drip tray
underneath. Avoid contact with splashes of water.
3. After rinsing, the appliance will return to the standby condition.
Fully Automatic Coffee Machine / User Manual
and latte button
will light up stably indicates that the empty system
before removing the water tank to resume back to the standby
and hot water button
and strong espresso button
will goes off. Then the
together for 5 seconds.
together.
will
23 / EN