Beko CEG5331X Bedienungsanleitung Seite 22

5
Cleaning
5.1 Cleaning of the appliance
WARNING: Never use any abrasive, vinegar or descaling agents not included in the box to
clean the appliance.
Assembly the metal tube back to the nozzle cover. Then push upward to place the nozzle cover
back. And turn it to right to lock it.
When lights up, the coffee grounds container needs to be empty.
When lights up stably, it indicates that the brewer is missing / installed improperly. When
is flashing, it indicates that the service door is missing/installed improperly.
It is important to do this step daily to make sure the function of automatic milk frother running
in good condition.
5.2 Self-Cleaning
WARNING: Please wait for finishing the self cleaning process and then switch off the
machine.
When is flashing, it indicates that the appliance needs to undergo self-cleaning. The appliance
will remain in the best condition if this function is performed at least once a month or more regularly
depending on the hardness of water used. It is also suggested that to
1. Fully fill the water tank.
2. Adding one pack of cleaning agent included in the box to the water tank.
WARNING: Do not use vinegar or other cleaning agent to do self-cleaning of this
appliance. The cleaning agent might damage the appliance.
3. Plug in the appliance.
4. Place a sufficient large container under the coffee spout.
5. In standby condition, press and hold
will be heard with
6. Press strong espresso button to confirm undergoing the self-cleaning process. To resume back to
the standby condition, press .
7. Will be flashing indicates that the appliance is undergoing the self-cleaning process.
22 / EN
and strong espresso button
and strong espresso button will be flashing.
Fully Automatic Coffee Machine / User Manual
for 5 seconds. A beep sound