Wiring Supply Voltage; Wiring Safe Relay Contacts And Safe Semiconductor Oututs; Wiring Auxiliary Outputs - Zander Aachen SCB Serie Betriebsanleitung

12.4 Wiring supply voltage

12.5 Wiring safe relay contacts and safe semiconductor outputs

12.6 Wiring auxiliary outputs

H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Deutschland • Tel +49 241 9105010
Fax +49 241 91050138 • info@zander-aachen.de • www.zander-aachen.de
18
Safety Time Control Device SCB
Figure14:
Dual-channel emer-
gency stop circuit with
PNP semiconductor
outputs / OSSD out-
puts with seüerate
cross circuit detection.
For safety applications
up to PL e, Cat. 4,
SIL 3.
Figure 15:
Connection of the power
supply to the terminals A1 and
A2.
Figure 16:
Connection to switching loads at
safety contacts (Exemplary contact
configuration. Differing according
to device type. Switching voltage
"L" according to tech. data).
Inductive loads at the outputs and
contacts must have sufficient
protective circuitry, e.g. a free-
wheeling diode.
Figure 17:
Wiring auxiliary outputs C1
and C2.