Safety Time Control Device
Appropriate use also includes compliance with:
EN ISO 13849-1, Safety-related parts of controllers,
EN 60204-1, Electrical equipment in machines.
For further information please refer to the above mentioned documents.
ATTENTION!
The user is responsible for integrating the device into a safe overall system. For this pur-
pose, the overall system has to be validated, e.g. according to EN ISO 13849-2.
If a operating instruction is enclosed with the product, then the specifications given in the
operating instruction are applicable
5. Disclaimer and warranty
If the above mentioned conditions for appropriate use are not complied with or if the safety
instructions are not followed or if any maintenance operations are not carried out as requi-
red, this shall lead to an exclusion of liability and loss of warranty.
ATTENTION!
We would like to point out that it is the full responsibility of the operator to ensure a plant
availability.
Using the SCB, a safety emergency stop relay according to
•
EN ISO 13849-1
•
IEC 62061
•
IEC 61508
•
EN 50156-1
•
EN 746-2
•
IEC 61511-1
is used, which will be brought into the safe state when the safety function is requested.
H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Deutschland • Tel +49 241 9105010
Fax +49 241 91050138 • info@zander-aachen.de • www.zander-aachen.de
7