R10
Timer button
R11
Motor lock button
R12
Light switch
R13
Reset button
R14
Left-hand joystick
R15
SPEED button
R16
Indicator light
10.2 Inserting/replacing the batteries
Beep: The remote control will beep constantly when the batteries need to be replaced. When this
occurs, replace the batteries immediately.
1. Turn the remote control upside down.
2. Remove the screw on the battery compartment cover.
3. Slide the battery compartment cover in the direction of the arrow.
4. Insert three 1.5 V AAA batteries into the battery slots. Observe the polarity markings.
5. Replace the battery compartment cover and screw it in place.
10.3 Operating the timer
The remote control features a 5-minute timer.
1. To activate the timer, press the timer button
2. The remote control will beep when the timer has elapsed.
3. Turn off the remote control to turn off the beep sound.
40
Set the timer
Locks the motors
No function
Reset the gyroscope
Motor function
Set elevator response
Control display
on the remote control.