Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Devices - Siemens MW 67440 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für MW 67440:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Connect and operate the appliance only in accordance with the speci-
fications on the rating plate. Only use indoors. Do not use the
appliance if the power cord and/or appliance are damaged.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.
, Safety instructions for this appliance
Risk of injury
Electric shock risk
Never immerse the base unit in liquids and do not clean in the dish-
washer. Do not use a steam cleaner.
Do not insert mains plug until all preparations for working with the
appliance are complete.
After a power failure the switched-on appliance starts up again.
Before cleaning the appliance, pull out the mains plug.
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
Before fitting/removing attachments, wait until the drive has come
to a standstill and pull out the mains plug.
Never fit attachments to/remove attachments from the base unit.
Risk of injury from sharp blades/rotating drive
Keep hands clear of rotating parts.
Do not reach into the feed tube. Always use the stuffer to push food
down the hole.
The blade is sharp and can cause injury.
Do not grip the sharp blades and edges of the shredding and slicing
inserts. During operation do not grip the shredding and slicing inserts.
Warning!
Never press the On/Off button and reverse button at the same time.
Before pressing the other button, wait until the drive has come
to a complete standstill. Risk of damaging the appliance.

Safety devices

Overload protection (thermal circuit breaker)
If the motor switches itself off while the
appliance is being used, the overload
protection feature has been activated.
Possible causes may be the simultaneous
processing of large quantities of food or
a blockage caused by bones.
If a safety system is activated, see
"Troubleshooting".
en
11
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis