Cleaning And Servicing; Troubleshooting - Siemens MW 67440 Gebrauchsanleitung

en
Shredding attachment
For shredding and slicing cheese, fruit, vege-
tables, nuts, almonds, dried bread rolls and
pieces of bread, chocolate and other hard
foods.
Risk of injury
Before fitting/removing attachment, wait
until the drive has come to a standstill and
pull out the mains plug.
Do not grip the sharp blades and edges
of the shredding and slicing inserts.
Do not reach into the feed tube. Always
use the stuffer to push food down the hole.
Fig.

Place required insert in the housing

of the shredding attachment.
The insert is automatically locked when
the appliance is switched on.
Put the shredding attachment, inclined

slightly to the right, on the drive.
Turn shredding attachment upwards until

it engages.
Place a bowl or plate under the outlet

opening.
Insert the mains plug.

Place the food to be processed in the

feed tube.
Insert pusher and hold in place.

Note:
Pusher can be inserted in one direction only.
Note position of the curve!
Switch appliance on with the On/Off

button.
Press food down using the pusher.

Do not exert too much pressure!
After using the appliance:
Switch appliance off with the On/Off

button.
Remove mains plug.

Pull out the pusher.

Remove the shredding attachment.

Holding down the release button, turn the
attachment to the right and remove.
Disassemble shredding attachment.

Clean all parts, see "Cleaning and

servicing".
14
14

Cleaning and servicing

Important information
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
Electric shock risk
Never immerse the base unit in liquids and
do not clean in the dishwasher.
Before cleaning the appliance, pull out the
mains plug!
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Do not clean the aluminium parts (housing,
worm gear and threaded ring of the mincer
attachment) in the dishwasher. Harmless
discolouration may occur over time.
Cleaning the appliance
Pull out the mains plug.

Wipe the mincer clean with a damp cloth.

If required, use a little detergent.
Cleaning the attachments
Rinse housing, worm gear and threaded

ring of the mincer attachment by hand.
Dry metal parts straight away and apply

a little edible oil to protect them from rust.
Fig.  gives an overview of how to clean

the individual parts.

Troubleshooting

Fault
Appliance stops but does not switch off.
Cause
Appliance overloaded, e.g. mincer blocked.
Remedial action
Switch appliance off and wait until it

comes to a standstill.
Press reverse button to remove the

blockage.
Wait until the drive comes to a standstill.

Switch on appliance again.
