Overview; Predetermined Breaking Point - Siemens MW 67440 Gebrauchsanleitung

en

Overview

Please fold out the illustrated pages.
Fig.

1 Mincer
2 Drive
3 Mincer attachment
4 Filler tray (Plastic)
5 Pusher
6 Lid for pusher
7 Release button
8 Handle
9 Storage compartment with insert
10 Cover for storage compartment
11 Indicator light
12 Reverse button
13 On/Off button
14 Thermal circuit breaker
15 Cord store
Mincer attachment
16 Casing
17 Worm gear with driver
18 Blade
19 Perforated disc
a) coarse, hole diameter 8 mm
b) fine, hole diameter 3 mm
c) medium, hole diameter 4.8 mm
20 Threaded ring
Sausage filler attachment
21 Nozzle
22 Bearing ring
Kebbe attachment
23 Shaper
24 Conical ring
Shredding attachment
25 Casing
26 Pusher
27 Interchangeable insert
a) Slicing attachment
b) Shredding insert – coarse
12
12

Predetermined breaking point

To prevent serious damage to your appliance
if the mincer is overloaded, the driver has
a notch (predetermined breaking point).
If an overload occurs, the driver breaks
instead. However, the driver can easily
be replaced.
Otherwise spare parts with a predetermined
breaking point are not a component of our
warranty obligations. Such spare parts can
be purchased from customer service
(order no. 753348).
Operation
Risk of injury!
Do not insert mains plug until all
preparations for working with the
appliance are complete.
Before operating the appliance and

accessories for the first time, clean
thoroughly; see "Cleaning and servicing".
Fig.

Stow perforated discs in the storage

compartment.
Stow individual parts of the sausage filler

attachment and kebbe attachment in the
pusher and close the pusher with the lid.
Assembling the mincer attachment
Fig.

Take perforated disc with required hole

diameter out of the storage compartment.
Insert worm gear into the housing.

Put blade on the worm gear.

Blades must face the perforated disc.
Put perforated disc with the required hole

diameter on the worm gear. Recess on
the perforated disc must be situated on
the lug in the housing.
Screw on threaded ring clockwise.

Do not tighten the threaded ring too tight.
Disassembly is in reverse order.

Use for:
– processing raw or cooked meat, bacon,
poultry and fish.
– Do not process bones!
– Process steak tartare through the mincer
twice.