Using The Single Point Calibration (Spc) Feature; Start A Single Point Calibration (Spc) - OHAUS Guardian 3000 Handbuch

TM
Guardian Hotplate-Stirrers
4.4.

Using the Single Point Calibration (SPC) Feature

4.4.1. Start a Single Point Calibration (SPC)

1. To enter the Single Point Calibration, the unit must first be in the top level of
the settings menu. Please refer to Accessing / Exiting Section for how to
enter the top level menu. Then wait for the screen to show

2. Briefly press the left knob to enter the Calibration settings menu.

Briefly press the left knob to enter the SPC settings menu.
3.

4. Briefly press the left knob again to change the calibration temperature.
The temperature will begin to blink to indicate that it can be modified.

5. Rotate the left knob to scroll to the desired temperature.
EN-19
CAL
.