How Does The Timer Work - De Dietrich DOP420-Serie Betriebsanleitung

99633771 ML.qxd 08/09/04
The display flashes 0:00 to indicate that you can now adjust the setting.
Press the + or - touch control to set the desired
end time.
Example: End of cooking at 13:00.
After these steps, the oven heating is delayed so that
cooking ends at.
At the end of cooking (end of programmed time),
- The oven stops,
- The cooking time indicator turns off,
- 0:00 is displayed
- A series of beeps is emitted for a few minutes.
The beeps are definitively deactivated by pushing on any touch control, when
the display also returns to the time of day.
In the two previous cases, your oven begins to heat up. To stop this heating,
return the function selector to 0.
H
5. ow does the timer work?
Your oven is equipped with an electronic timer that is
independent of the oven functions, making it possi-
ble to measure times.
In this case, the timer display takes priority over the time of
day display.
Press the "SET" touch control until the
flashes -> the display is a small, flashing hourglass.
Press on the ( + or - ) touch control until the desired length
of time is displayed (60 minute maximum )
The display stops flashing after a few seconds and the timer
starts working, counting down the time in seconds.
Once the time has expired, the timer emits a series of beeps
to notify you.
It is possible to change or cancel the timer programme at any
time.
34
09:05 Page 34
How does your oven work?
SET
symbol (Timer)
SET
SET
SET