Installation
Steps
1. Carefully push the oven into the box, making sure
that it is in the centre.
2. Open the door and fasten thewith the screws that
were supplied.
!
Important Information
Electrical connection
The appliance is fitted with a plug and must only be connected to a properly
installed earthed socket.
Only a qualified electrician who takes the approriate regulations into account
may install the socket or replace the connecting cable. If the plug is no longer
accessible following installation, an all-pole isolating switch must be present
on the installation side with a contact gap of at least 3 mm. Contact protection
must be ensured by the installation.
Fuse protection: see instructions for use-technical data.
Accessories
• Never use the microwave without the turntable.
!
• The turntable can withstand max. 5 kg.
• The turntable must turn when using all types of hea-
ting.
Wire rack
• For the microwave and for
42
baking and roasting in the
oven.
• Fully insert the appliance and centre it.
• Do not kink the connecting cable.
• Screw the appliance into place.
• The gap between the worktop and the appliance
must not be closed by addtional battens.
Turntable
• Food which particularly requires a lot of heat from
underneath can be prepared directly on the turntable.
• The turntable can turn clockwise or anti-clockwise.
Place the turntable on the drive in the centre of the
cooking compartment. Ensure that it is properly
fitted.
Glass tray