Installation
Building in
Do not hold or carry the appliance by the door
!
handle. The door handle cannot hold the weight
of the appliance and may break off.
• Carefully push the oven into the box, making sure that it
is in the centre.
• Open the door and fasten the oven with the screws that
were supplied.
• Fully insert the appliance and centre it.
525
Electrical connection
!
Important Information
• The appliance is fitted with a plug and must only be
connected to a properly installed earthed socket.
• Only a qualified electrician who takes the approriate re-
gulations into account may install the socket or replace
the connecting cable.
• If the plug is no longer accessible following installati-
on, an all-pole isolating switch must be present on the
installation side with a contact gap of at least 3 mm.
• Contact protection must be ensured by the installation.
• Fuse protection: see operation instruction / technical
data.
• Do not kink the connecting cable.
• Screw the appliance into place.
• The gap between the worktop and the appliance must
not be closed by addtional battens.
51