Electrical Connection - KKT KOLBE EBM4502ED Bedienungsanleitung

Building in
• Do not hold or carry the appliance by the door handle. The door handle cannot hold
the weight of the appliance and may break off.
1. C arefully push the oven into the box, making sure that it is in the centre.
2. Open the door and fasten the
Fully insert the appliance and centre it.
J
Do not kink the connecting cable.
J
Screw the appliance into place.
J
The gap between the worktop and the appliance must not be closed by
J
addtional battens.

Electrical connection

The appliance is fitted with a plug and must only be connected to a properly installed earthed socket.
Only a qualified electrician who takes the approriate regulations into account may install the socket
or replace the connecting cable. If the plug is no longer accessible following installation, an all-pole
isolating switch must be present on the installation side with a contact gap of at least 3 mm. Contact
protection must be ensured by the installation.
Fuse protection: see instructions for use-technical data.
oven with the screws that were supplied.
8
10
7