Troubleshooting - Panasonic ES-SL33 Betriebsanleitung

Replacing the system outer foil and the inner
blades
system outer foil
inner blades
Removing the outer foil section
Press the foil frame release buttons [
and lift the outer foil section [
Attaching the outer foil section
After turning the water inlet surface to the
front, securely attach the outer foil section
[ A ] to the shaver until it clicks.
Replacing the system outer foil
1. Press the system outer foil release
buttons [ ] and pull down the
A

system outer foil.
2. Align the front side of the foil
frame with the system outer foil
mark ( ) and insert them firmly
together.
The system outer foil cannot be
reversely attached.
Always insert the system outer foil to the
foil frame when attaching to the shaver.
16
PB013084 - ES-SL33_(01)GB_ _05-13-16.indd 16
once every year
once every two years
2
A
3]
A ] upwards.
1
1 2
Replacing the inner blades
1. Remove the inner blades [
one at a time.
Do not touch the edges (metal parts) of
the inner blades to prevent injury to your
hand.
2. Insert the inner blades one at a
time until they click.

Troubleshooting

Problem Action
This can be improved by cleaning
Trimmed hairs fly
every time after shaving.
all over.
Clean the blades with the brush.
Replace the system outer foil if it is
System outer foil
damaged or deformed.
gets hot.
(See page 16)
The blades may not dry quickly due
to temperature conditions.
The blades do not
dry.
The blades can be dried more easily
by removing for drying.
The odor is getting This can be improved by cleaning
stronger. every time after shaving.
]
A

1 2
2016/5/17 9:01:13