Charging The Shaver - Panasonic ES-SL33 Betriebsanleitung

Charging the shaver

Turn the shaver off before inserting.
Wipe off any water droplets on the appliance socket.
Charging with the Appliance
plug
1. Insert the appliance
plug [ ] into the
C

shaver.
2. Plug in the adaptor [
into a household outlet.
Make sure that the charge
status lamp ( ) is on in red.
The charging time in
approx. 10 hours.
Charging the battery for more than 10 hour will not affect
battery performance.
The charge status lamp (
plug is disconnected from a household outlet.
3. Disconnect the adaptor [
completed.
Note
You cannot operate the shaver while charging.
PB013084 - ES-SL33_(01)GB_ _05-13-16.indd 13
1
]
C

) glows and stays on until the
] after charging is
C

While charging
Charging in progress
The charge status lamp (
red.
2
Charging complete
The charge status lamp (
in red after charging is completed.
Notes
If there is crackling noise on radios or other devices while
charging, charge the shaver using a different household
outlet.
When the appliance is not used for 6 months or more, the
battery will weaken (leak battery fluid, etc.). Fully charge the
battery once every 6 months.
Recommended ambient temperature for charging is 0 - 35
°C. Battery performance may decrease outside of the
recommended temperature.
When charging the shaver for the first time or when it has
not been in use for more than 6 months, the lamp on the
main body may not glow for a few minutes, or the operating
time may shorten. Please charge it for more than 18 hours
in such cases.
You can charge the battery before it is completely discharged.
However, it is recommended to charge when the battery is
completely discharged. The battery life depends strongly on
factors such as how it is used and stored.
) stays on in
) remains on
2016/5/17 9:01:08
13