Application; Pcb Design - Honeywell 010120.17 Montage, Anschluss, Anleitung

Mounting and Connection Instructions DUO I/O Module BUS-2/BUS-1
1.

Application

This module is a further addition to the range of detector group and control modules.
Detectors equipped with conventional connection technology can thus be integrated in the BUS
system. The module also has 2 semiconductor outputs for switching and control functions.
The module can be operated at either BUS-2 or BUS-1.
Performance features
- Operation at BUS-2 or alternatively at BUS-1
- 4 detector group inputs with clear function
- 4 LEDs for status indication, visible from the outside or if required with individual cover
- 2 semiconductor outputs "open collector", LOW active
- Combined operation with the DUO Switching Module 230V AC / 8A, f.m. (Item no. 010121.17)
- Module f.m. only: Simple installation in flush-mounted or cavity wall boxes with Æ 60 mm (DIN,
Austria, Switzerland)
System design
System-
Störung
Einbruch 7 Ü 8 9
S
B O
Sabotage E
R N
F D
Überfall 4 A 5 E 6
L R
Pol.-Notruf L F
F U
U N
Info 1 N K
1 K 2 T 3
I
Info 2 T O
I
O N
Info 3 N
0
Info 4
Alarmzentrale
561-MB100
Z A509
024X
VdS - Zulassungs-Nr.
2.

PCB design

Output 1
Output 2
BUS-2/BUS-1
U_b
Cover contact
f.m. pcb
s.m. pcb
The LED indicator function depends on the operating mode (see following Chapters for details)
External voltage
(max. 30 V DC)
or
+12 V DC from BUS
Betrieb SAlarm SStörung
Bereiche
B wählen/ A Meldungen
ansehen ansehen
Gruppen
G ansehen/ F Zusatz-
funktionen
sperren
Melder Eingabe
M ansehen/ E Quittierung
sperren Bedienende
nein ja
ALARMSTOP Intern
unscharf scharf-
AUS löschen EIN schalten
Control
panel
e.g. for contacts, passive glass breakage sensors
0 V
+U_b
+U
0 V
BUS-2
+12 V DC
or
BUS-1
DUO I/O-
Module
DG1 DG2 DG3 DG4
4 detector groups with clear function
LED2 LED1
DIP switch
LED4 LED3
Consumer
1 2
O1
O2 max. 50 mA
per output
Detector group 1
Detector group 2
Detector group 3
Detector group 4
15