Application; Pcb Design - Overview - Honeywell 010128 Montage, Anschluss, Anleitung

Mounting and Connection Instructions
1.

Application

This module is a further addition to the range of detector group and control modules.
equipped with conventional connection technology can thus be integrated in the BUS system.
With the universal BUS interface the module can be operated at every BUS-2 or BUS-1 -
compatible panel.
Performance features
- Operation at BUS-2 or alternatively at BUS-1
- 2 detector group inputs with clear function
- 2 LEDs for status indication, visible from the outside
- Operation as Detector group connection module or Universal connection module at BUS-1
- Operation as 5 Input module or DUO I/O module at BUS-2
- Module f.m. only: Simple installation in flush-mounted or cavity wall boxes with Æ 60 mm (DIN,
Austria, Switzerland)
System design
Betrieb SAlarm
System-
Störung Bereiche
Einbruch 7 8 9 B wählen/
Ü ansehen
B S
O
Sabotage E
R N Gruppen
F D
Überfall 4 A 5 E 6 G ansehen/
L R sperren
F
Pol.-Notruf L
F U
U N Melder
Info 1 N K ansehen/
1 K 2 T 3 M
I sperren
Info 2 T
I O
O N nein
N ALARMSTOP
Info 3 unscharf
0 AUS
löschen
Info 4
Alarmzentrale
561-MB100
Z A509
024X
VdS - Zulassungs-Nr.
HB/MB panel series
MB-Secure
2. PCB design – Overview
Note: The LED indicator function depends on the operating mode (see following Chapters for
details)
BUS-2/BUS-1, U_b
Cover contact
2 Detector group m
SStörung
Meldungen
A ansehen
Zusatz-
F funktionen
Eingabe
Quittierung
E
Bedienende
ja
Intern
scharf-
EIN
schalten
e.g. for contacts, passive glass breakage sensors
odule BUS-2/BUS-1
BUS-2
or
2 Detector group
BUS-1
module
BUS-2/BUS-1
DG1 DG2
2 detector groups with clear function
LED2 LED1
8 1
DIP switch
, f.m. 13
Detectors
Detector group 1
Detector group 2