Safety Notes; Correct Use; Operating And Status Indicators - SICK WT24-2 Betriebsanleitung

1

safety notes

2

Correct use

3

Operating and status indicators

8008784.Z474 | SICK
Subject to change without notice
Photoelectric proximity sensor
Operating instructions
Read the operating instructions before commissioning.
■
Connection, mounting, and setting may only be performed by trained specialists.
■
Not a safety component in accordance with the EU Machinery Directive.
■
Power supply: Class 2
■
UL Environmental Rating: Enclosure type 1
When commissioning, protect the device from moisture and contamination.
■
These operating instructions contain information required during the life cycle of
■
the sensor.
The WT24-2 is an opto-electronic photoelectric proximity sensor (referred to as "sensor"
in the following) for the optical, non-contact detection of objects, animals, and persons.
If the product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
Photoelectric proximity sensor with background suppression.
9
1
2
4
3
5
6
27
(1.06)
Figure 1: Dimensional drawing
Alignment sight
1
LED signal strength indicator
2
Standard direction of the material being detected
3
Center of optical axis, sender
4
Center of optical axis, receiver (close range)
5
7
10
(0.39)
14 17.5
(0.55) (0.69)
8
9
M5
11.8
30
(1.18)
(0.46)
65
(2.56)
5