Devices With Special Features - SICK WT24-2 Betriebsanleitung

7

Devices with special features

12
For WT24-2B470 (with foreground suppression): The sensing range is adjusted relative to
the background with the potentiometer. Clockwise rotation: sensing range increased; coun‐
terclockwise rotation: sensing range reduced. Turn the potentiometer clockwise until the
yellow LED indicator lights up. Afterwards, only turn the potentiometer counterclockwise as
far as is needed so that the yellow LED no longer lights up. When an object is moved into
the path of the beam, the yellow LED indicator must light up. If the yellow LED indicator
does not light up during object detection, repeat the adjustment process, or reduce the dis‐
tance between the sensor and background and then repeat the adjustment process.
The sensor is adjusted and ready for operation.
4 Time function setting
WT24-2xx2x, WT24-2xx5x: no time delay, t1 = time delay, t2 = time delay; for -2R: 0 = relay
deactivated, 1 = relay active. Time delay selector switch can be set on the device according
to see table 1.
Time stages: 0.5 ... 10 s can be adjusted.
0
+
1 2
Figure 9: Time functions
WT24-2xx2x / -2xx5x: with static front-screen heating for use in environments with
gradual temperature changes within the +5 °C ... +15 °C range.
WT24-2R210S03: with mounting bracket (2016754)
WT24-2B420S08: sensing range max.: 30...3000 mm on white (90% remission), with
timer unit: adjustable 0.6...1.3 sec
WT24-2V210S09: preset to dark switching, with mounting bracket (2016754)
WT24-2V540S10: glass front screen
WT24-2R210S11: sensing range, typ. max.: 100...2000 mm on white (90% remission),
operating range or background suppression: can be adjusted between about 1200...
1600 mm, increased resistance in the event of extreme impact load.
0.5 ... 10 sec.
0.5 ... 10 sec.
8008784.Z474 | SICK
Subject to change without notice