Safety Information; General Safety Notes; Intended Use; Product Description - SICK WTS26 Betriebsanleitung

2

Safety information

2.1

General safety notes

2.2 Notes on UL approval
2.3

Intended use

3

Product description

3.1

Operating and status indicators

8020355.1GI9/2022-07-13 | SICK
Subject to change without notice
Connection, mounting and configuration of the product must only be car‐
ried out by qualified personnel.
This product does not constitute a safety component as defined in the
NO
Machinery Directive.
2006/42/EC
SAFETY
Do not install the product in places exposed to direct UV radiation (sun‐
light) or other weather conditions.
The product must be adequately protected against moisture and contami‐
nation.
The device shall be supplied from an isolating transformer having a secondary overcur‐
rent protective device that complies with UL 248 to be installed in the field rated either:
a) max 5 amps for voltages 0 ~ 20 V (0 ~ 28.3 V peak), or
b) 100 / Vp for voltages of 20 ~ 30 V (28.3 ~ 42.4 V peak).
Alternatively, they can be supplied from a Class 2 power supply.
UL Environmental Rating: Enclosure type 1
The WTS26 is an opto-electronic photoelectric proximity sensor (referred to as "sensor"
or "product" in the following) for the optical, non-contact detection of objects, animals,
and persons. If the product is used for any other purpose or modified in any way, any
warranty claim against SICK AG shall become void.
WTS26x-xxxxxx10
WTS26x-xxxxxx20
1
2
4
3
OPERATING INSTRUCTIONS
WTS26x-xxxxxx11
WTS26x-xxxxxx21
6
1
2
4
3
O P E R A T I N G I N S T R U C T I O N S | WTS26
WTS26x-xxxxxx12
WTS26x-xxxxxx22
5
1
2
4
3
27
en