Safety Information; General Safety Notes; Intended Use; Product Description - Sick Gr18 Inox Betriebsanleitung

OPERATING INSTRUCTIONS
2

Safety information

2.1

General safety notes

2.2

Intended use

en
3

Product description

3.1

Operating and status indicators

4 Mounting
22 O P E R A T I N G I N S T R U C T I O N S | GRSE18(S)V
Connection, mounting and configuration of the product must only be car‐
ried out by qualified personnel.
This product does not constitute a safety component as defined in the
NO
Machinery Directive.
2006/42/EC
SAFETY
Do not install the product in places exposed to direct UV radiation (sun‐
light) or other weather conditions.
The product must be adequately protected against moisture and contami‐
nation.
The GRSE18(S)V is an opto-electronic through-beam photoelectric sensor (referred to
as "sensor" in the following) for the optical, non-contact detection of objects, animals,
and persons. A sender (GRS) and a receiver (GRE) are required for operation. If the
product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
+ –
Figure 1: Operating element: sensitivity setting
Mount sensors (sender and receiver) using suitable mounting brackets (see the SICK
range of accessories). Align the sender and receiver with each other.
8021182.1HT2/2023-02-13 | SICK
Subject to change without notice