Preparation For Operation - Vitek VT-1457 W Die Betriebsanweisung

ENGLISH ENGLISH

Preparation for operation

− Before using the unit, wash the blender-
attachment (1), the chopping knife (8), the
whisk (11), the chopper bowl (9) and the
measuring cup (12) with warm water and a
neutral detergent, rinse and dry
− Wipe the motor unit (2), the lid-gear (7) and
the whisk gear (10) with a soft slightly damp
cloth.
Attention! Do not immerse the motor unit (2),
the lid-gear (7) and the whisk gear (10), the
power cord and the power plug into water or any
other liquids.
Do not put the attachments and the bowls in a
dish wash machine.
Selection of the attachments rotation speed
− To select the attachments rotation speed
from 1 to 8, press and hold the (4) "I" button
and rotate the control (5). Modes change will
be displayed (6).
− For operation in the maximal speed mode,
press and hold the (3) "II" button. Numeric
value of the mode "9" will appear on the
display (6).
Note: Numeric value of the speed mode is
displayed (6) only at pressing and holding
the (4) "I" or (3) "II" buttons.
Using the blender
WARNING: before assembling make sure
that the power plug is not inserted into
the socket.
− Insert the blender-attachment (1) into the
motor unit (2), by matching the marks on the
body of the attachment (1) and the motor
unit (2); turn the blender-attachment (1) until
bumping.
− Insert the plug into the socket. Indication in
the form of the power cord plug will appear
on the display (6). The blender is ready for
operation.
− Immerse the blender attachment (1) into the
bowl with the products, which you want to
chop/mix; you can use the measuring cup
(12) for it.
VT-1457.indd 4
− Select the required speed of the attachment
rotation, by pressing the holding the
corresponding button (4) "I" or (3) "II".
Note: Products should be put into the bowl
before switching on the unit. Before
starting to chop/mix, we recommend to
peel fruit, remove non-edible parts, such
as bones, cut fruit into 2х2 cm cubes.
− After you finish using the unit, take the plug
out of the socket and remove the attachment
(1).
Attention!
• Do not remove the attachment (1) during
operation of the blender.
• In order not to damage the blades, do
not process too hard products such as
cereals, rice, seasonings, coffee beans,
ice, frozen products.
Using the whisk
Use the whisk attachment (11) only to make
cream, cook of sponge dough or mixing ready
desserts.
WARNING: before assembling make sure
that the power plug is not inserted into the
socket.
− Insert the whisk gear (10) into the motor unit
(2), by matching the marks on the body of the
gear (10) and the motor unit (2); turn the gear
(10) until bumping.
− Insert the whisk (11) into the gear (10).
− Insert the plug into the socket.
− Put the whisk (11) into the bowl with
products.
− Select the required speed of the whisk
rotation, by pressing the holding the
corresponding button (4) "I" or (3) "II".
− After you finish using the unit, take the plug
out of the socket, disconnect the whisk (11)
from the gear (10), and remove the gear (10)
from the motor unit (2).
Attention!
• Do not use the whisk (11) to make stiff
dough.
• Products should be put into the bowl
before switching on the unit.
4 4
23.11.2011 18:01:15