Safety Instructions For Batteries; Technical Data - Roller Disc 100 Betriebsanleitung

eng
● Only move or carry the ROLLER'S Disc 100 / ROLLER'S Disc 100 RF /ROLLER'S
Akku-Disc 100 22 V / ROLLER'S Disc 225 by the feed lever (6) when this has
been locked as described in 2.2. If the feed lever is not locked there is a danger
that the feed lever (6) will come away from the spindle (8). ROLLER'S Disc
100 / ROLLER'S Disc 100 RF / ROLLER'S Akku-Disc 100 22 V / ROLLER'S Disc
225 can then fall over or fall off. Danger of injury.
● Protect yourself and persons accompanying the work against the rotating
pipe during cutting. There is a risk of injury.
● Never leave the pipe cutting machine running unattended. Switch off the
pipe cutting machine during longer work breaks and pull out the mains plug/
battery. Electrical devices can cause hazards which lead to material damage or
injury when left unattended.
● Children and persons who, due to their physical, sensory or mental abilities
or lack of experience and knowledge are unable to operate the pipe cutting
machine safely may not use this pipe cutting machine without supervision
or instruction by a responsible person. Otherwise there is a risk of operating
errors and injuries.
● Only allow trained persons to use the pipe cutting machine. Apprentices
may only use the pipe cutting machine when they are over 16, when this is
necessary for their training and when they are supervised by a trained operative.
● The pipe cutting machine is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or instruction concerning the
use of the pipe cutting machine by a person responsible for their safety. Children
must be supervised to ensure that they do not play with the pipe cutting machine.
● Check the power cable of the pipe cutting machine and extension leads
regularly for damage. Have these renewed by qualifi ed experts or an authorised
ROLLER customer service workshop in case of damage.
● Only use approved and appropriately marked extension leads with a suffi cient
cable cross-section. Use extension leads up to a length of 10 m with cable
cross-section 1.5 mm², from 10 – 30 m with cable cross-section 2.5 mm². cross-section 1.5 mm², from 10 – 30 m w cross-section 1.5 mm², from 10 – 30 m with cable cross-section 2.5 mm².

1. Technical data

Use for the intended purpose
WARNING WARNING
ROLLER'S Disc 100, ROLLER'S Disc 100 RF, ROLLER'S Akku-Disc 100 22 V and ROLLER'S Disc 225 are intended for the purpose of cutting and deburring the inside
and outside of pipes.
All other uses are not for the intended purpose and are therefore prohibited.
1.1. Scope of Supply
ROLLER'S Disc 100 Basic:
ROLLER'S Disc 100 RF Set:
ROLLER'S Akku-Disc 100 22 V Basic: Cordless pipe cutting machine, Li-Ion 21.6 V, 5.0 Ah battery, Li-Ion rapid charger, ring spanner size SW 27/17, instruction manual.
ROLLER'S Disc 225 Basic:
1.2. Article numbers
Pipe cutting machine
ROLLER'S cutting wheel Cu-INOX for pipes of the press fi tting ROLLER'S cutting wheel Cu-INOX for pipes of the press fi tting ROLLER'S
systems of stainless steel, copper, carbon steel
ROLLER'S ROLLER'S cutting wheel Cu especially for pipes of the ROLLER'S cutting wheel Cu especially for pipes of the
press fi tting systems of copper
ROLLER'S ROLLER'S cutting wheel St for steel pipes, cast pipes (SML) ROLLER'S cutting wheel St for steel pipes, cast pipes (SML)
ROLLER'S ROLLER'S cutting wheel C-SF especially for pipes of the ROLLER'S cutting wheel C-SF especially for pipes of the
press fi tting systems/push fi tting systems of carbon steel,
simultaneously produces a chamfer
ROLLER'S ROLLER'S cutting wheel V, s 10, for plastic and composite tubes, ROLLER'S cutting wheel V, s 10, for plastic and composite tubes,
wall thickness s ≤ 10 mm
ROLLER'S ROLLER'S cutting wheel P, s 21, for plastic and composite tubes, ROLLER'S cutting wheel P, s 21, for plastic and composite tubes,
wall thickness s ≤ 21 mm
ROLLER'S ROLLER'S cutting wheel RF ROLLER'S cutting wheel RF
ROLLER'S battery Li-Ion 21.6 V, 5.0 Ah
ROLLER'S battery Li-Ion 21.6 V, 9.0 Ah
Rapid charger Li-Ion 230 V
Feed lever ROLLER'S Disc 225
Spring plug Spring plug Spring plug
Base frame
Base frame, movable
Roller, pack of 4
Rollers INOX (pack of 4) of tubular stainless steel
Roller, pack of 4
Roller insert for cutting pipes Ø 40 – 100 mm
Ring spanner size 27/17
ROLLER'S Assistent 3B, material rest with tripod
ROLLER'S Assistent WB, material rest with clamping device
ROLLER'S Assistent XL 12"
Height adjustable pipe rest 1, Ø 40 – 110 mm, Ø 1½ – 4" Height adjustable pipe rest 1, Ø 40 – 110 mm, Ø 1½ – 4" Height adjustable pipe rest 1, Ø 40 – 110 mm, Ø 1½ – 4"
Height adjustable pipe rest 1, Ø 100 – 225 mm, Ø 4 – 8"
Height adjustable pipe rest 2, Ø 40 – 110 mm, Ø 1½ – 4"
ROLLER'S Werkmeister E, folding workbench
ROLLER'S Werkmeister, folding workbench
ROLLER'S Rondo 10 – 54 E, outside/inside pipe deburrer
ROLLER'S Akku-Disc 100 22 V ROLLER'S Akku-Disc 100 22 V and ROLLER'S Disc 225 are intended for the purpose of cutting and deburring the inside
Pipe cutting machine, ring spanner size 27/17, instruction manual.
Pipe cutting machine, ring spanner size 27/17, one each of pipe guides Ø 75 mm and 110 mm, operating instructions.
Pipe cutting machine, ring spanner size 27/17, 2 height adjustable pipe rests 1 for pipes Ø 100 – 225 mm, Ø 4 – 8",
feed lever, spring plug, instruction manual.
ROLLER'S Disc 100 ROLLER'S Disc 100 RF ROLLER'S Akku-Disc 100 22 V ROLLER'S Disc 225
845000
845050
845053
845052 845052
845055
845051
845218
089082 089082
849315
849310
845118
845110
845119
849112
120120
120130
120125
845220 845220
, Ø 4 – 8" , Ø 4 – 8"
110 mm, Ø 1½ – 4" 110 mm, Ø 1½ – 4"
120240
120200
113835

Safety instructions for batteries

WARNING WARNING
Read all safety warnings, instructions, illustrations and specifi cations provided
with this power tool. Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
See also www.albert-roller.de → Downloads → Instruction Manuals.
Explanation of symbols
WARNING WARNING
Danger with a medium degree of risk which could result in
death or severe injury (irreversible) if not heeded.
CAUTION CAUTION
Danger with a low degree of risk which could result in minor
injury (reversible) if not heeded.
NOTICE NOTICE
Material damage, no safety note! No danger of injury.
Read the operating manual before starting
Use ear protection
Electrical device complies with protection class II
Not suitable for using outdoors
Environmental friendly disposal
CE conformity mark
ROLLER'S Akku-Disc 100 22 V ROLLER'S Akku-Disc 100 22 V ROLLER'S Disc 225
845006 6 6
845054 845054
845218
089082 089082
849315
849310
849112
120120
120130
120125
120240
120200
113835
eng
845007 845005
845050 845050 845050 845050 845050
845053 845053 845053 845053 845053
845052 845052 845052 845052 845052
845055 845055 845055 845055 845055
845051 845051
845057
571581
571583
571585
845218 845218 845218 845218 845218
089082 089082 089082 089082 089082
849315
849310
845118
845110
845060
849112 849112 849112 849112 849112
120120
120130
120125
845220
845220 845220
845230 845230
120240
120200
113835
13