Werbung
Changing the probe settings
Acquisition mode
NOTE: After the RMI or
Acquisition
Acquisition
RMI-Q has been acquired,
mode off
mode on
the RMP40 will only show
Acquisition mode off.
Stop triggering here, unless multiple probe mode is required,
in which case deflect the stylus for more than 4 seconds.
Multiple probe mode (omitted for radio on)
(see "Multiple probe mode settings" to view all 16 choices)
Mode on
Mode off
Machine 1
Machine 2
Machine 16
If no changes are made in multiple probe mode, then deflecting the stylus for more than 4 seconds
will return the probe settings to "Switch-on method". If multiple probe mode is selected, proceed
to "Acquisition mode" to repartner one probe with the RMI or RMI-Q.
Acquisition mode
Acquisition
Acquisition
mode off
mode on
New
settings
complete
Return to "Switch-on method"
1-13
Werbung
