Cleaning And Care; Maintenance/Spare Parts; Moving Parts - attika RAIS 2:1 Bedienungsanleitung

English

Cleaning and care

The wood burning stove and chimney must be inspected by a chimney sweep annually.
The stove must be cold during cleaning and maintenance.
If the glass is sooty:
Clean the glass regularly and only when the stove is cold, otherwise the soot will burn
solid.
• Dampen a piece of paper or newspaper, dip it in the ashes and rub the sooty glass.
• Rub with a piece of paper and the glass becomes clean.
• Alternatively use glass polish, which you can buy from you RAIS distributor.
External cleaning (cold stove) is done with a soft dry cloth or soft brush.
Cleaning the combustion chamber
The ash is scraped/shovelled out and stored in a non-flammable container until it has
cooled. You may dispose of ash together with your regular household waste.
REMEMBER!!
• Never remove all the ash from the combustion chamber
• the fire burns best on a layer of ash approx. 20mm thick.
Prior to a new heating season, the chimney and smoke gas connector should always be
checked for blockage.
Inspect the stove interior and exterior for damage, especially seals and the heat insulat-
ing plates (vermiculite).

Maintenance/spare parts

Moving parts are especially worn down by frequent use. Door seals also become worn.
Only use original spare parts. We recommend service performed by your dealer at the
end of
a period of warmth.
Combustion chamber lining
The combustion chamber lining protects the wood burning stove body from the heat of
the fire. Large temperature fluctuations may result in cracks in the plates of the com-
bustion chamber lining, which however, do not affect the functional capacity of the
stove. They do not need to be replaced unless long-term use causes them to crumble.
The plates of the combustion chamber lining are only inserted into the stove, and may
be easily replaced by your dealer or yourself.

Moving parts

Door hinges and door lock should be lubricated when necessary. We recommend using
only our lubricating spray, as the use of other products may lead to the formation of
odours and residues. Contact your dealer to obtain the lubricant.
attika
RAIS/ - User manual for RAIS 2-1
23