Installation - attika RAIS 2:1 Bedienungsanleitung

attika
English RAIS/ - User manual for RAIS 2-1

Installation

It is important that the stove is installed properly for the sake of both the environment
and safety.
When installing the stove, all local rules and regulations, including those referring to
national and European standards must be respected. Local authorities and a chimney
specialist should be consulted before installation.
The stove may only be installed by a qualified/competent RAIS dealer/installer or the
warranty will be invalid.
Do not make unauthorised changes to the stove.
CAUTION:
Before the stove is used, the local chimney sweep must be notified.
There should be an ample supply of fresh air in the installation room to ensure good
combustion- if necessary through an airbox connection . Note that any mechanical ex-
haust ventilation e.g. an extraction hood may reduce the air supply. Any air vents must
be placed in such a manner, that the air supply is not blocked. The stove is equipped
with two convection exit points in the top, which can possibly be connected with suit-
able air ducts to other rooms in the home.
The stove has an air consumption of 10-20m³/h.
The floor construction must support the weight of the stove as well as a possible chim-
ney. If the existing floor construction doesn't meet this requirement, suitable adjust-
ments (e.g. load distributing plate) should be made in order to achieve it.
Consult with a construction expert.
The stove is to be placed on the fire-resistant material.
It must be ensured that flammable objects (eg. furniture) are not placed closer than the
distances indicated in the following sections concerning installation (fire risk).
When you choose where to set up your RAIS wood burning stove, you should consider
the heat distribution to the other rooms. So you get the maximum pleasure from your
stove.
The stove should be set-up at a safe distance from flammable materials.
See the manufacturer's plate on the stove.
Upon receiving, the stove should be inspected for defects.
N.B.!!
The stove may only be installed by a qualified/compe-
tent RAIS dealer/installer.
See www.rais.com for list of dealers .
9