Cleaning And Care; Maintenance/Spare Parts; Moving Parts; Cleaning The Combustion Chamber - attika Q-BE INSERT Bedienungsanleitung

English

Cleaning and care

Wood burning stove and chimney must be inspected by a chimney sweep once a year. The
stove must be cold during cleaning and care
If the glass is sooty:
• Clean the glass regularly and only when the stove is cold, otherwise the soot will stick.
• Moisten a piece of paper or newspaper, dip it in the ash, and rub the sooty glass.
• Rub with a piece of paper and the glass will become clean.
• Alternatively, you can use glass polish, which you can obtain from your RAIS dealer.
Clean the exterior with a soft dry cloth or a soft brush. Prior a new heating
season, it should be checked that the chimney and smoke gas connector
are not blocked.
Inspect the stove interior and exterior for damage especially the gasket and the heat-
insulating plates (vermiculite).

Maintenance/spare parts

Frequent use wears moving parts, in particular. Door sealings are also wearing parts.
Only use original spare parts.
We recommend service performed by your dealer after
completion of a heating period.
Combustion chamber lining
The combustion chamber lining protects the stove body against the heat from the fire The
significant
temperature fluctuations may result in cracks in the liner plates, which, however, do not affect
the stove's
functional capacity. They do not need to be replaced unless long-term use causes them
to crumble.
The combustion chamber lining plates require only inserting and can be easily replaced by your
dealer or yourself.

Moving parts

Door hinges and door lock should be lubricated as needed.
We recommend to use only our own lubricating spray, as the use of other products
may lead to the formation of odours and residues.
Contact your dealer to obtain the lubricant.

Cleaning the combustion chamber

Scrape the ash out and store it in a non-flammable container until it cools off. You can dispose
of ash together with your regular household waste.
REMEMBER!
• Never remove all the ashes from the combustion chamber
• the wood will burn at its best with a small layer of ashes
20
attika
RAIS/ - User Manual Q-BE INSERT