Hdmi Control Connection; Hdmi Control Setup - Pioneer krl-46v Bedienungsanleitung

HDmi Control

HDmi Control connection

First connect the Pioneer AV Sound system or a Pioneer BD Player/Pioneer Recorder that supports the HDMI
CEC protocol.
note
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices'
power have been turned on. Change the external input source by pressing input1–8, select the appropriate external source
and verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
Connecting a pioneer BD player/pioneer recorder via
the pioneer aV Sound system
HDMI-certified cable
HDMI-certified cable
pioneer BD player/
pioneer recorder

HDmi Control Setup

HDmi Control
Set to "On" to enable HDMI CEC functions. When
turning on the power while "HDMI CONTROL" is set
to "On", the connected HDMI devices' power will be
turned on in conjunction with the TV.
1
Press h and the "HOME MENU" screen displays.
2
Press a/b to select "Option".
3
Press a/b to select "HDMI CONTROL Setup",
and then press enter.
4
Press a/b to select "HDMI CONTROL", and
then press enter.
5
Press c/d to select "On", and then press
enter.
auto power on
If this is activated, the One Touch Play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from
the HDMI source.
Optical audio
cable
pioneer aV Sound
system
1
2
3
note
• The factory default for this item is "Off".
Selecting recorder
Here, you can select a recorder for the recording from
several connected recorders.
1
2
3
note
• If you have connected the Pioneer AV Sound system
between the TV and a Pioneer Recorder, the external
source's indication changes (e.g. from "INPUT5" to
"INPUT5 (Sub)").
Connecting a pioneer BD
player/pioneer recorder only
HDMI-certified
cable
Repeat steps 1 to 3 in HDmi Control.
Press a/b to select "Auto Power On", and then
press enter.
Press c/d to select "On", and then press
enter.
Repeat steps 1 to 3 in HDmi Control.
Press a/b to select "Selecting Recorder", and
then press enter.
Select the recorder, and then press enter.
pioneer BD player/
pioneer recorder