Cleaning And Maintenance - Concept VP 8336 Bedienungsanleitung

EN
EN EN
EN
EN EN
OPERATING MANUAL – ASSEMBLY OF THE VACUUM CLEANER
EN
OPERATING MANUAL – ASSEMBLY OF THE VACUUM CLEANER
NOTE
OPERATING MANUAL – ASSEMBLY OF THE VACUUM CLEANER
NOTE
Before fixing or removing accessories, always pull the plug out of the electrical socket!
OPERATING MANUAL – ASSEMBLY OF THE VACUUM CLEANER
Before fixing or removing accessories, always pull the plug out of the electrical socket!
NOTE
1. Connecting the flexible hose to the appliance
NOTE
Before fixing or removing accessories, always pull the plug out of the electrical socket!
1. Connecting the flexible hose to the appliance
Insert the flexible hose into the appliance's air suction inlet.
Before fixing or removing accessories, always pull the plug out of the electrical socket!
Insert the flexible hose into the appliance's air suction inlet.
Continue pushing until you hear a clicking sound, which indicates that the correct
1. Connecting the flexible hose to the appliance
Continue pushing until you hear a clicking sound, which indicates that the correct position has been reached.
1. Connecting the flexible hose to the appliance
Insert the flexible hose into the appliance's air suction inlet.
position has been reached.
For removing the flexible hose, press both stopper buttons and remove the hose
Insert the flexible hose into the appliance's air suction inlet.
Continue pushing until you hear a clicking sound, which indicates that the correct
For removing the flexible hose, press both stopper buttons and remove the hose
(Fig. 1).
Continue pushing until you hear a clicking sound, which indicates that the correct position has been reached.
(Fig. 1).
The suction power may be controlled manually on the hose handle.
position has been reached.
For removing the flexible hose, press both stopper buttons and remove the hose
The suction power may be controlled manually on the hose handle.
When the slide throttle is closed, the air flow is stronger.
For removing the flexible hose, press both stopper buttons and remove the hose
(Fig. 1).
When the slide throttle is closed, the air flow is stronger.
Slide throttle in open position - weaker air flow.
(Fig. 1).
The suction power may be controlled manually on the hose handle.
Slide throttle in open position - weaker air flow.
The suction power may be controlled manually on the hose handle.
When the slide throttle is closed, the air flow is stronger.
2. Attaching the telescopic tube to the hose adapter
When the slide throttle is closed, the air flow is stronger.
Slide throttle in open position - weaker air flow.
2. Attaching the telescopic tube to the hose adapter Put the telescopic tube on the hose adapter and turn it slightly.
Slide throttle in open position - weaker air flow.
Put the telescopic tube on the hose adapter and turn it slightly.
2. Attaching the telescopic tube to the hose adapter
3. Extending the telescopic tube
Put the telescopic tube on the hose adapter and turn it slightly. 2. Attaching the telescopic tube to the hose adapter
3. Extending the telescopic tube
Press the plastic latch and pull the smaller tube outwards.
Put the telescopic tube on the hose adapter and turn it slightly.
Press the plastic latch and pull the smaller tube outwards.
3. Extending the telescopic tube
4. Fixing the floor attachment to the telescopic tube
3. Extending the telescopic tube
Press the plastic latch and pull the smaller tube outwards.
4. Fixing the floor attachment to the telescopic tube
Insert the telescopic tube into the floor attachment and turn it slightly.
Press the plastic latch and pull the smaller tube outwards.
Insert the telescopic tube into the floor attachment and turn it slightly.
The flap (Fig. 2) is used for setting the floor attachment to brushing (for smooth
4. Fixing the floor attachment to the telescopic tube
The flap (Fig. 2) is used for setting the floor attachment to brushing (for smooth
floors), or to smooth vacuuming (for carpets).
4. Fixing the floor attachment to the telescopic tube
Insert the telescopic tube into the floor attachment and turn it slightly.
floors), or to smooth vacuuming (for carpets).
Insert the telescopic tube into the floor attachment and turn it slightly.
The flap (Fig. 2) is used for setting the floor attachment to brushing (for smooth
The flap (Fig. 2) is used for setting the floor attachment to brushing (for smooth
ACCESSORIES floors), or to smooth vacuuming (for carpets).
floors), or to smooth vacuuming (for carpets).
ACCESSORIES
1. Slot nozzle
ACCESSORIES
1. Slot nozzle The slot nozzle adapter is used for vacuuming places that are difficult to access, such as radiators, slots, corners,
ACCESSORIES
The slot nozzle adapter is used for vacuuming places that are difficult to access, such as radiators, slots, corners,
pedestals, spaces between upholstery, and others.
1. Slot nozzle
pedestals, spaces between upholstery, and others.
2. Upholstery nozzle
1. Slot nozzle The slot nozzle adapter is used for vacuuming places that are difficult to access, such as radiators, slots, corners,
2. Upholstery nozzle
This upholstery nozzle attachment may be used for smaller upholstered areas.
The slot nozzle adapter is used for vacuuming places that are difficult to access, such as radiators, slots, corners,
pedestals, spaces between upholstery, and others.
This upholstery nozzle attachment may be used for smaller upholstered areas.
pedestals, spaces between upholstery, and others.
2. Upholstery nozzle
2. Upholstery nozzle
This upholstery nozzle attachment may be used for smaller upholstered areas.
USING THE APLIANCE
This upholstery nozzle attachment may be used for smaller upholstered areas.
USING THE APLIANCE
Before using the appliance, make sure that filters and the dust collection bag are properly positioned and mounted.
USING THE APLIANCE
Before using the appliance, make sure that filters and the dust collection bag are properly positioned and mounted.
USING THE APLIANCE
Unwind the supply cable length you need. The yellow mark on the supply cable indicates the optimum cable length. Do
Unwind the supply cable length you need. The yellow mark on the supply cable indicates the optimum cable length. Do
not unwind the supply cable beyond the red mark!
Before using the appliance, make sure that filters and the dust collection bag are properly positioned and mounted.
not unwind the supply cable beyond the red mark!
Before using the appliance, make sure that filters and the dust collection bag are properly positioned and mounted.
Unwind the supply cable length you need. The yellow mark on the supply cable indicates the optimum cable length. Do
1. Insert the plug into the electric voltage socket.
Unwind the supply cable length you need. The yellow mark on the supply cable indicates the optimum cable length. Do
not unwind the supply cable beyond the red mark!
1. Insert the plug into the electric voltage socket.
2. Press the ON/OFF switch on the appliance.
not unwind the supply cable beyond the red mark!
2. Press the ON/OFF switch on the appliance.
3. Set up the suction power you need using the output power control.
1. Insert the plug into the electric voltage socket.
3. Set up the suction power you need using the output power control.
4. After you have stopped vacuuming, switch the appliance off and disconnect it from the electric voltage outlet.
1. Insert the plug into the electric voltage socket.
2. Press the ON/OFF switch on the appliance.
4. After you have stopped vacuuming, switch the appliance off and disconnect it from the electric voltage outlet.
5. For winding up the supply cable, press the winding button with one hand and hold the supply cable with the other
2. Press the ON/OFF switch on the appliance.
3. Set up the suction power you need using the output power control.
5. For winding up the supply cable, press the winding button with one hand and hold the supply cable with the other
hand to avoid uncontrolled movement.
3. Set up the suction power you need using the output power control.
4. After you have stopped vacuuming, switch the appliance off and disconnect it from the electric voltage outlet.
hand to avoid uncontrolled movement.
4. After you have stopped vacuuming, switch the appliance off and disconnect it from the electric voltage outlet.
5. For winding up the supply cable, press the winding button with one hand and hold the supply cable with the other
5. For winding up the supply cable, press the winding button with one hand and hold the supply cable with the other
hand to avoid uncontrolled movement.
hand to avoid uncontrolled movement.
VP9181
VP8110, VP8111, VP8112 VP9181
VP9181
VP9181 VP8110, VP8111, VP8112
VP 8336
48
EN
EN
CHECKING THE DUST COLLECTION BAG FILL
When the dust collection bag fill indicator turns red during operation, replace the full dust collection bag immediately.
If the dust collection bag fill indicator is still red after the bag has been replaced, this may be due to several causes:
- some of the air passages (hoses, telescopic tube, suction inlet, brush adapter, or other adapters) are obstructed;
- the motor filter is dirty;
- the air outlet filter is dirty.
Check for each of the possible causes above and eliminate the problem before you start vacuuming. If the cause of the
problem cannot be identified, hand over the product to the nearest service centre. Never use the vacuum cleaner if the
(Fig. 1)
bag level indicator is completely red during operation. The motor could be damaged irreparably
(Fig. 1)
(Fig. 1)
(Fig. 1)

CLEANING AND MAINTENANCE

(Fig. 1)
(Fig. 1)
You may clean the accessories and the appliance with a wet cloth. Never immerse
the appliance in water! Do not use any aggressive substances for cleaning, such as
solvents or abrasives!
REPLACING THE DUST COLLECTION BAG
(Fig. 2)
1. Unplug the product from the mains. Disconnect the hose from the suction inlet
(Fig. 2)
(Fig. 2)
and open the appliance cover.
2. Push the flap on the dust retention bag holder; remove the used dust retention
(Fig. 2)
(Fig. 2) bag (Fig. 3). Dispose of a paper or SMS dust collection bag. Be careful not to tear
(Fig. 2)
the bag when handling. If the bag is made of fabric, empty it and close it
carefully - it can be used repeatedly.
3. Insert a new or empty dust retention bag by fitting the plate in the bag holder. The
bag opening must be aligned with the hose hole in the appliance cover.
4. Never use the vacuum cleaner without the dust bag installed! If you forget to
insert the dust retention bag or you insert it incorrectly, the appliance's motor
may become damaged.
5. Close the cover. Press until you hear a click.
REPLACING FILTERS
• The filters should be cleaned or replaced when they are visibly dirty, or if the
appliance's suction power is reduced. Always check the filters after using the
appliance.
• In order to avoid damage to the appliance, do not use it with incorrectly installed
filters.
• Before replacing the filters, disconnect the appliance from the electrical socket.
• You can buy suitable types of filters from your dealer, or you can order them from
the manufacturer.
CLEANING AND REPLACEMENT OF THE MOTOR FILTER
1. Disconnect the flexible hose and open the appliance cover.
2. Pull the dust collection bag out of its holder so that you can access the motor filter
more easily.
3. Remove the motor filter (Fig. 4). You can clean the filter by tapping it. If the filter is
heavily soiled, you may wash it in lukewarm water and let it dry properly.
27
4. Insert the cleaned or new motor filter into the appliance and close the cover.
27 27
27
28 28
27 27
36
35
VP8336 VP8336
EN EN
EN
(Fig. 3)
(Fig. 3)
(Fig. 4)
(Fig. 4)
VP8110, VP8111, VP8112 VP9181
VP 8336
49