Siemens GSN Serie Gebrauchsanleitung Seite 30

en
Fault
If the display,
Fig. 2/1 flashes
The appliance cannot be
controlled via
"Alarm" display, Fig. 2/2,
comes on, acoustic
warning signal is emitted.
30
Possible cause
The freezer compartment
became too warm due to a
power failure or malfunction.
The appliance is not connected
to the network.
Appliance has been switched
off.
Fault the freezer compartment
is too warm!
S The ventilation openings are
blocked.
S A foreign object is stuck
between the refrigerating unit
and the wall.
S Fully automatic
defrosting has started.
Refrigeration restarts
after half an hour
at the latest.
Remedial action
When the button, Fig. 2/6 , is
pressed, the warmest temperature
reached in the freezer compartment
is displayed, Fig. 2/1 , for five sec.
and then cleared. The display stops
flashing. If the displayed
temperature is more than +3 ºC,
prepare a ready meal by boiling or
frying the frozen food and refreeze.
No longer store the frozen produce
for the max. storage period.
Install system interface.
Press the main switch, Fig. 2/7
l
Press the " "/ "alarm" button to
switch off the warning signal.