Disposal; Troubleshooting - Ferroli NATURFIRE EVO serie Anleitung Für Betrieb, Installation Und Wartung

10.2 DISPOSAL

Follow the operations below for boiler decommissioning:
Step Action
1 Disconnect the boiler from the power supply and unplug it from the socket.
2 Empty all pellets from the hopper.
3 Seal the boiler inside strong packing.
4 Dispose of the boiler as required by the regulations in force in the country of installation.
Information for management of electric and electronic appliance waste containing
batteries or accumulators
This symbol, which is used on the product, batteries, accumulators or on the
packaging or documents, means that at the end of its useful life, this product,
the batteries and the accumulators included must not be collected, recycled or
disposed of together with domestic waste.
Improper management of electric or electronic waste or batteries or accumulators
can lead to the leakage of hazardous substances contained in the product. For
the purpose of preventing damage to health or the environment, users are kindly
asked to separate this equipment and/or batteries or accumulators included
from other types of waste and to arrange for disposal by the municipal waste
service It is possible to ask your local dealer to collect the waste electric or
electronic appliance under the conditions and following the methods provided
by national laws transposing the Directive 2012/19/EU.
Separate waste collection and recycling of unused electric and electronic
equipment, batteries and accumulators helps to save natural resources and to
guarantee that this waste is processed in a manner that is safe for health and
the environment.
For more information about how to collect electric and electronic equipment and
appliances, batteries and accumulators, please contact your local Council or
Public Authority competent to issue the relevant permits.

11. TROUBLESHOOTING

Alarms are indicated by an acoustic signal (if activated) and a message on the control panel.
In case of an alarm, shut down the boiler, eliminate the cause and restart the boiler according
to the normal procedure described in this manual. Every alarm status causes immediate
boiler shutdown. The alarms, with causes and cures, which can appear on the control panel
are listed below:
Signalling
AL 1
POWER
The boiler does not start.
FAILURE
▪ Occurs in case of a fume
AL 2
temperature probe fault.
FUME PROBE ▪ The shutdown procedure
is activated.
86
Fault Possible causes
No power during the lighting
stage.
▪ Faulty probe
▪ The probe is
disconnected from the
board.
cod.48427M013_11/19
NATURFIRE EVO 27 - 34
Cures
▪ Turn the boiler OFF by
pressing the button P4 and
repeat the lighting procedure.
▪ Other reinstatement operations
must be carried out by a
Service Centre.
Reinstatement operations must be
carried out by a Service Centre.
EN