Troubleshooting - Hendi 222157 Bedienungsanleitung

Troubleshooting

If the appliance does not function properly, please
check the below table for the solution. If you are
Problems
Appliance does not switch on
Abnormal noises while pro-
cessing
Appliance cannot operate
Appliance is overheat
Technical specification
Item no.: 222157
Operating voltage and frequency: 230V~ / 50Hz
Rated input power: 250W
Protection class: Class II
EN
Remark: Technical specification is subjected to change without prior notification.
8
Possible causes
Power plug is not connected to a
suitable power supply properly.
ON/OFF button (1) is not pressed.
The blending part (7) is not con-
nected correctly.
Inside overheat devices activates.
Overtime operation
still unable to solve the problem, please contact the
supplier/service provider.
Possible solution
Check to make sure the power plug is connected
to a suitable electrical outlet properly.
Press and hold the ON/OFF button (1) to switch on
the appliance.
Disassembly and assembly the blending part (7)
again.
Let the appliance cool down complete before start
operation again.
Release the ON/OFF button and unplug the device,
wait 10 minutes for the motor to cool down.
Waterproof protection class: IP23
Dimension: approx. 71 x 71 x (H) 444 mm
Net weight: approx. 1,6kg
Rotation speed (rpm): approx. 6,600 to 13,500
Noise level: < 85dB(A)