Using The Height Adjustment Memory - Invacare Dolomite Jazz serie Gebrauchsanweisung

Dolomite® Jazz
1. Stand behind the rollator with flat shoulders.
2. Loosen the handlebar by pushing the locking lever A
upwards and then adjust the handles to a suitable
height.
The handles should usually
be positioned at wrist
height. Therapist may
suggest different heights
depending on specific
needs of the client.
3. Lock the handlebar by pushing the handle slightly
downwards, a distinct "click" is heard when the handle
is locked in its position.
4. Repeat the procedure on the other side.
12

4.10 Using the Height Adjustment Memory

When adjusting the handle height for the first time, the
built-in height adjustment memory can be used.
1. To access the height memory for the first time, raise
the push handles to the highest position to reveal the
adjustment screw A.
2. Loosen the screw of the height adjustment memory,
but do not remove it. Adjust the handles to a suitable
height and retighten the screw.
3. Push the handles slightly downwards to fix the height.
Suitable tool to use is a 1,5 mm hexagon key (not
included).
If the adjustment screw A is removed by mistake
and the height adjustment memory can not be
accessed, raise the handle to the highest position to
make the height adjustment memory visible again.
A
1560692-E