Empty The Water Tank - Klarstein Metrobreeze Las Vegas 9 2G Bedienungsanleitung

EMPTY THE WATER TANK

Manual drainage:
When the internal water tank is full the unit will stop working.
1. Shut off the unit and unplug. Try
not to move the model abruptly
as this may cause the water in the
internal tank to spill out.
2. Place a tray under the water plug
or place the unit in a drainage
area.
3. Unscrew the drain plug cap and
remove the rubber stopper. The
water drains from the internal
water tank.
4. Put the rubber stopper back and
screw the drain plug cap back in
place.
Continuous drainage:
1. Unscrew the drain plug cap and
remove the rubber stopper.
2. Connect a water pipe to the water
outlet. You can plumb this pipe
into your current plumbing system.
When the water pipe is pointing
downwards, the water drains by
gravity. Or you can use a water
pump.
Note: This model has a self-evaporative function, which reduces the need to empty
the water tank. If the unit is vented correctly most of the water is reused to cool
the condenser coils and any excess is evaporated. Please do not use continuous
drainage if you intend to use the self-evaporating facility.
EN
41