Draining The Water - Klarstein KRAFTWERK ECO SMART 11 Bedienungsanleitung

EN
42

DRAINING THE WATER

During the cooling process, the unit extracts water from the humid air.
When the water tank is full, both the compressor and the motor switch off and the
appliance emits a buzzing sound. Press any key to stop the buzzing. The "water
tank full" indicator flashes.
To restart the cooling function, empty the water tank as follows:
1. Switch off the air conditioner and do not move it when the water tank is full.
2. Place a container (e.g. a water bowl) under the drain opening.
3. Remove the drain plug and the rubber plug from the drain opening and let
the water drain off.
4. When the container is almost full, put the rubber plug back on the drain hole
and empty the water tray.
5. Repeat the process until the unit is completely empty.
6. Replace the rubber plug and screw the drain cap tight.
7. Switch the device on. The full water tank or compressor indicator should now
stop flashing.
Outlet
Rubber plug
Drain plug