Empty The Water Tank - Klarstein Metrobreeze Las Vegas 12 2G Bedienungsanleitung

All manuals and user guides at all-guides.com

EMPTY THE WATER TANK

Manual drainage:
When the internal water tank is full the
unit will stop working.
1. Shut off the unit and unplug. Try not
to move the model abruptly as this
may cause the water in the internal
tank to spill out.
2. Place a tray under the water plug
or place the unit in a drainage
area.
3. Unscrew the drain plug cap and
remove the rubber stopper. The
water drains from the internal water
tank.
4. Put the rubber stopper back and
screw the drain plug cap back in
place.
Continuous drainage:
1. Unscrew the drain plug cap and
remove the rubber stopper.
2. Connect a water pipe to the water
outlet. You can plumb this pipe
into your current plumbing system.
When the water pipe is pointing
downwards, the water drains by
gravity. Or you can use a water
pump.
Note: This model has a self-evaporative function, which reduces the need to empty
the water tank. If the unit is vented correctly most of the water is reused to cool
the condenser coils and any excess is evaporated. Please do not use continuous
drainage if you intend to use the self-evaporating facility.
EN
41