Redmond RMC-M90 Bedienungsanleitung Seite 27

Problem Possible causes
Power cord is not connected to the appliance
and (or) to the outlet
The appliance does not switch on Faulty electrical outlet
Power supply failure
Power supply interruption (voltage level is
unstable or below the standard)
There is a foreign object or particles
between the bowl and the heating element.
The meal is taking too long to cook
(litter, grain, pieces of food)
The bowl is installed with the distortion
Heating element is dirty
The tightness of
The steam comes off from under the connection between
lid during cooking process the bowl and inner
lid is broken.
In case you didn't manage to eliminate the defects, please, refer to the authorized service centre.
Environmentally friendly disposal (WEEE)
The packaging, user manual and the device itself shall be taken to the applicable
collection point for the recycling of electrical and electronic equipment. Do not throw
away the electronic waste to help protect the environment.
Old appliances must not be disposed with other household waste but must be collected
separately. Municipal disposal of recyclable wastes is free of charge. The owners of old
appliances are required to bring it to a waste facility centre. With this little extra effort, you
can help to ensure that valuable raw materials are recycled and pollutants are treated as
appropriate.
This appliance is labelled in accordance with European Directive 2012/19/EU — concerning
used electrical and electronic appliances (waste electrical and electronic equipment WEEE).
The guideline determines the framework for the return and recycling of used appliances as
applicable throughout the EU.
Solution
Unplug the appliance and let it cool
down. Close the lid until tight, plug in
the appliance
Plug in the appliance to the working
outlet
Check the voltage supply. In case of its
failure, contact an authorized
organization.
Check the stable voltage supply. If it is
unstable or below the standard, contact
an authorized organization.
Unplug the appliance and let it cool
down. Remove the foreign object or
particles.
Install the bowl properly
Unplug the appliance and let it cool
down. Clean the heating element.
The bowl is
improperly installed Install the bowl properly
into the housing
The lid is loosely Check for any foreign objects (litter, grain,
closed or there is a pieces of food) between the lid and the
foreign object under housing, remove them. Always close the
it multicooker lid until it clicks into place.
Sealing rubber on
Check the condition of the sealing rubber
the inner lid is dirty,
on the inner lid. Probably it needs to be
deformed or
replaced.
damaged
RMC-M90
GBR
GBR
27