Prior To First Use - Redmond Rmc-M90 Bedienungsanleitung

3. Cooking stage indicator
4. "МУЛЬТИПОВАР" temperature indicator
5. "Отложенный старт" indicator
6. Indicator of the timer operation
7. Timer
8. Selected programme indicator
I. PRIOR TO FIRST USE
Carefully remove the multicooker and its accessories from the packaging. Dispose of all
packaging materials.
Keep all warning labels, including the serial number identification label located on the housing.
After transportation or storage at low temperatures allow the appliance to stay at room
temperature for at least 2 hours before using.
Wipe the housing of the appliance with a soft, damp cloth. Rinse the inner bowl with warm
soapy water and dry thoroughly. An odour on first use of the appliance is normal and does not
indicate a malfunction. In such case, clean the appliance, following "Cleaning and Maintenance".
Place the device on a flat, stable, and hard surface away from any objects or cabinets that
could be damaged by steam, humidity, or high temperatures.
Before operating, make sure that the outer and inner parts of the multicooker have no dents,
cracks or any other visible damages. There should not be any obstructions between the heating
element and the bowl.
CAUTION! Do not lift the appliance by the carrying handle with the filled bowl.
Do not lift the appliance by the handles of the bowl!
Do not operate the appliance without the bowl or an empty bowl - in case of an accidental start
of the cooking program it will lead to critical overheating of the appliance or will damaging the
non-stick coating. Before frying pour an amount of vegetable or sunflower oil in the bowl.
II. MULTICOOKER OPERATION
Setting The Cooking Time
The REDMOND RMC-M90 multicooker allows manually adjusting the cooking time, set by
default for each programme (except "ЭКСПРЕСС"). Time adjustment range and interval depend
on the programme of cooking selected. To set:
1. Select the cooking programme. Press the "Час" button repeatedly to adjust the hours. Hold
the button down to scroll through the digits.
2. Press the "Мин" button repeatedly to adjust the minutes. Hold the button down to scroll
through the digits.
20
3. To set the cooking time of less than 1 hour press the "Час" button repeatedly to reset to
zero. Adjust the minutes using the "Мин" button.
4. When the time is set (display keeps blinking) proceed to the next stage in accordance
with the programme selected. To cancel all settings, press the "Подогрев/Отмена" button
and reset.
Manually adjusting the cooking time, consider time adjustment range and interval of selected
programme, given in the table of default settings.
For your convenience the cooking time range in all programmes starts with the minimum setting,
enabling you to prolong the operating time of the programme, if the dish is undercooked.
In certain automatic programmes countdown starts only when the device reaches its operating
temperature. E.g. if you set the "НА ПАРУ" programme on 5 minutes, the countdown of the
programme begins only when the water comes to a full boil providing enough steam. In the
"МАКАРОНЫ" programme, the countdown begins after water starts boiling and the "Старт"
button is being repressed.
"Отсрочка старта" ("Time Delay") Function
This function allows setting the programme to finish by certain time. Cooking time may be
delayed for a period from 10 minutes to 24 hours with 10 minute intervals. Setting the Time
Delay function, take the cooking time of the programme into consideration. The time of a delay
should be longer than the cooking time of the programme selected; otherwise the programme
starts running right after you press the "Старт" button.
When the automatic programme is selected and the temperature and cooking time are adjusted,
you may set the Time Delay.
1. Press the "Отложенный старт" button to enter the Time Delay setting mode. The words
"Отложенный старт" are displayed. Timer is blinking.
2. Press the "Час" button repeatedly to adjust the hours in 24 hour format. Hold the button
down to scroll through the digits.
3. Press the "Мин" button repeatedly to adjust the minutes. Hold the button down to scroll
through the digits.
4. If you need to set the delay of less than 1 hour, repeatedly press the "Час" button to reset
to zero and adjust the minutes using the "Мин" button.
5. To cancel the settings press the "Подогрев/Отмена" button and reset.
6. When the time is set press and hold down the "Старт" button. Time Delay function indicator
lights up. Set programme starts running and the countdown begins.
7. Your meal will be ready when the time set expires. When the programme finishes, the device
automatically switches to "Keep Warm" (the "Подогрев/Отмена" button indicator lights up).
8. Press the "Подогрев/Отмена" button to cancel the "Keep Warm". Button indicator goes off.
The Time Delay function is available in all automatic programmes except the "ЖАРКА", "МАКА-
РОНЫ" and "ЭКСПРЕСС".