Separating The Connection; Using The Hands-Free Appliance - Silvercrest IAN 279754 Bedienungsanleitung

Select the "Car Kit" hands-free kit from the list of
available devices on the mobile phone.
Enter the preset pass code "9999" and then confirm
this to pair the devices with each other. You will hear
a short, low beep followed by a short, high-pitched
beep and the LED status indicator
3 seconds.
Switch off the hands-free kit after successfully pairing
the second mobile phone.
Press and hold the multifunction button
3 seconds until you hear a short high-pitched beep. The
LED status indicator
The hands-free kit will attempt to make a connection to
the last two connected mobile phones within the next few
seconds. You will hear a double beep once the devices
have been successfully paired.
Note:
In some cases, it will be necessary to make the connection
manually via the Bluetooth

Separating the connection

If you wish separate the mobile telephone from the hands-
free appliance, for example, to connect it to another
Bluetooth
®
Switch the hands-free appliance off
or
separate the connection over the Bluetooth
in the mobile telephone.
Note:
You need not erase the coupling with the hands-free appli-
ance in the Bluetooth

Using the hands-free appliance

After successful coupling, the following functions are
available to you. Some of the described functions are
only possible with a mobile telephone that supports the
Handsfree Profile (HFP).
SBTF 10 C3
flashes twice every 3 seconds.
appliance:
menu to separate the connection.
®
flashes every
menu on the mobile phone.
®
for about
menu
®
│
11 ■
GB