Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Guidelines For Battery Chargers; Original Accessories/Auxiliary Equipment; Information On Saw Blades - Parkside PSSA 20-Li A1 Originalbetriebsanleitung

Akku-säbelsäge
Vorschau ausblenden Andere Handbücher für PSSA 20-Li A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 64

Safety guidelines for battery chargers

This appliance may be used by
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks . Do not allow
children to use the appliance as a
toy . Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised .
To avoid potential risks, damaged
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person .
The charger is suitable for indoor use
only .
WARNING!
If the power cord requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards .
CAUTION!
This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/
PAP 20 A3 .
A current list of battery compatibility can be
found at www .lidl .de/Akku .
50 
GB │ MT
Original accessories/auxiliary
equipment
Use only the accessories and additional
equipment that are specified in the oper-
ating instructions and are compatible with
the appliance. Using attachments or accessory
tools other than those recommended in the oper-
ating instructions can lead to a risk of injury .

Information on saw blades

You can use any saw blade provided it is fitted with
a suitable mount – ½" (12 .7 mm) universal shaft .
Saw blades optimised for your sabre saw are
available from retail stores in different lengths for
various purposes .
NOTE
TPI = teeth per inch = the number of teeth
per 2 .54 cm
Wood saw blade:
Dimensions: 152 .5 x 0 .9 mm, 6 - 12 TPI
Ideal for: sawing construction wood, chipboard,
panels and plywood, and also plunge cuts .
PSSA 20-Li A1

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis