Introduction; Intended Use; Features; Package Contents - Parkside PSSA 20-Li A1 Originalbetriebsanleitung

CORDLESS SABRE SAW
PSSA 20-Li A1

Introduction

Congratulations on the purchase of your new appli-
ance . You have chosen a high-quality product . The
operating instructions are part of this product . They
contain important information about safety, usage
and disposal . Before using the product, please
familiarise yourself with all operating and safety in-
structions . Use the product only as described and for
the range of applications specified . Please also pass
these operating instructions on to any future owner .

Intended use

This appliance is designed for sawing, cutting to
length and adapting wood, plastics, metal and
construction materials . The sabre saw is suitable for
rough sawing work, straight and curved cuts and
cuts off surfaces flush . Heed the information con-
cerning saw blades and practical advice on sawing .
Any other uses of or modifications to the machine
are deemed to be improper usage and may result in
serious physical injury . The manufacturer accepts no
responsibility for damage(s) attributable to misuse .
This appliance is not intended for commercial use .

Features

Saw blade (SWISS MADE)
Footplate
Quick-release chuck
Pendulum stroke switch
Ventilation slits
Safety lock-out
ON/OFF switch
Handle
Battery charge level button
Battery display LED
Battery pack*
Release button for battery pack
Locking lever for footplate
Red charge control LED
Green charge control LED
High-speed charger*
■ 46 │ GB │ MT

Package contents

1 cordless sabre saw PSSA 20-Li A1
1 saw blade for wood BIM 152 .5 mm
(SWISS MADE)
1 carrying case
1 set of operating instructions

Technical data

Cordless sabre saw PSSA 20-Li A1
Rated voltage
Rated idle stroke speed
Stroke length
Max . cutting performance
Sawblade mounting
Battery PAP 20 A1*
Type
Rated voltage
Capacity
Cells
High-speed battery charger PLG 20 A1*
INPUT
Rated voltage
Rated power consumption
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
* BATTERY AND CHARGER ARE NOT SUPPLIED
20 V (DC)
n 0–3000 rpm
0
20 mm
Wood 100 mm
20 mm
(in non-alloyed steel)
½" (12 .7 mm)
LITHIUM ION
20 V (DC)
2 .0 Ah
5
230–240 V ∼, 50 Hz
(AC)
65 W
3 .15 A
T3.15A
21 .5 V (DC)
2 .4 A
approx . 60 min
II /
(double insulation)
PSSA 20-Li A1