Steam Function; Steaming With The Clothes Brush - Silvercrest SDMF 1300 A1 Bedienungsanleitung Und Sicherheitshinweise

Steam function

WARNING – RISK OF INJURY!
► Never attempt to steam pieces of clothing while they are being worn .
1) Plug the mains cable
pressing the On/Off switch
warm­up phase . As soon as the blue LED
appliance will start producing steam .
2) Hold the appliance by the handle
on the steam head
3) Press the steam button
steam head
NOTE
► For the continuous steam output, you can also lock the steam button
6
► You can use the steam function with or without the clothes brush
4) Release the steam button
head
5

Steaming with the clothes brush

1) Before switching on the appliance, place the clothes brush
head
5
head
5
clicks into place .
C
2) Switch the appliance on .
3) Hang the item to be ironed on a coat hanger and pull it taut with one hand .
Steam the garment evenly from top to bottom .
4) Slowly brush the section of the fabric from top to bottom . Do not apply a lot of
pressure . The combination of steam and the clothes brush
all wrinkles .
■ 64 │ GB │ MT
into the power socket and turn on the power by
q
3
away from your body .
5
and start at the top of the garment . Move the
6
slowly downwards .
5
by sliding it downwards .
6
. The appliance will need to heat up again .
, making sure that the large wing is on the underside of the steam
(fig . C) . Push the clothes brush
. The blue LED
1
lights up permanently, the
1
. Make sure you aim the steam openings
w
as soon as water drips from the steam
onto the steam head
4
flashes during the
.
4
on the steam
4
until it
5
gently removes
4
SDMF 1300 A1