AERMEC VED ... I serie Bedienungs- Und Installationsanleitung Seite 30

8.6. DIP SWITCH SETTING - ONLY FOR UNITS WITH DUCTED INSTALLATION
In ducted installations, to allow adjusting the
static pressure provided by the fan coil to
the pressure drops of the same duct, it is
possible to increase the
VED 0-1-2 I
DIP SWITCHES
1 - 2 - 3 - 4
VED 3 5 7 I
30
4880950_03 - 1811
maximum speed in the VED I fan coils. To
increase fan speed, modify the settings of
the dip switches located on the VED I
motor and driver.
DIP SWITCHES
1 - 2 - 3 - 4
Attention!: Follow the settings indicated in
the table for each size of VED I.