SPORTSTECH CX70 Benutzerhandbuch Seite 33

2
Mount the forward stand (2) to the main frame (1) using the carriage bolts (18), washers (19) spring
washers (22), cap nut M10 (20).
3
Slide the front cover with seal (15) over the vertical frame (4). Remove the screws (21) spring
washers (22) and washers (19) from the main frame (1) and connect the wires A1 and A2 together.
Screw the vertical frame (4) to the main frame with the washers (19), spring washers (22) and
screws (21). Make sure that the cables leading up to the console do not fall back into the frame. You
can temporarily secure the cables with tape or rubber tape if needed.
33