Electrolux ERN3114FOW Benutzerinformation Seite 17

ENGLISH 17
If necessary cut the adhesive sealing strip
and then apply it to the appliance as shown
in figure.
x
x
Drill the appliance using a Ø 2.5 mm drill (10
13 mm mm max. penetration).
Fix the square fitting to the appliance.
1
Ø 2.5 mm
2
3
Install the appliance in the niche.
Push the appliance in the direction of the ar-
row (1) until the upper gap cover stops
against the kitchen furniture.
Push the appliance in the direction of the ar-
row (2) against the cupboard on the oppo-
site side of the hinge.
2
1