Timex W273 Bedienungsanleitung Seite 32

retrograde hand moves relative to the altitude value
displayed by the 4th center hand.
4. Push crown in when done.
To change the unit from METERS to FEET or FEET to
METERS, press C. If button C is not released within one
second, changes made in calibration are discarded and
the current altitude is displayed.
AlTIMETEr on/oFF
To turn the altimeter on, press C. The lower retrograde
hand points to METERS. Using the markings on the top
ring, the 4th center hand shows the current altitude's
hundreds and tens value with divisions every ten
METERS/FEET. The upper retrograde hand shows the cur-
rent altitude's thousands value with divisions every one
thousand METERS/FEET.
58
To change the unit from METERS to FEET, press C a sec-
ond time. To change the unit from FEET to METERS, press
C twice (altimeter is turned off first then turned back on
with the unit in METERS).
Example: Altitude–2310 m Example: Altitude–7580 ft
59