Connecting Analyzer To Computer - Stihl MDG 1 Gebrauchsanleitung

English
Connecting Analyzer to
Computer
Bluetooth Connection
Bluetooth wireless technology is used to
transmit information between the
analyzer and the computer. A free USB
port on the computer is required for the
Bluetooth USB stick supplied with the
analyzer.
LEDs, Colors, Meanings
B
A
0/
LED (1) Meaning
Glows green, then Self test completed
yellow, then red
and then continu-
ously green:
Glows continuously Ready for
green: operation
Glows continuously Internal malfunc-
red: tion – replace
analyzer
18
LED (2)
Flashes white:
Glows continuously
blue:
Flashes blue:
Glows continuously
red:
Plugging In and Connecting Bluetooth
USB Stick
2
Plugging in and connecting
automatically
The Bluetooth USB stick is detected and
connected automatically.
1
Plug Bluetooth USB stick into a free
N
USB port – go to "Connecting
Analyzer to Computer".

Connecting Analyzer to Computer

Connect the analyzer to the computer
only after installing the STIHL diagnostic
software and the Bluetooth USB stick.
Start STIHL diagnostic software.
N
The status bar shows
Searching for MDG 1
MDG 1 found
click once on "MDG 1" graphic –
N
status bar shows:
MDG 1 connected
If two or more analyzers (MDG 1) are
Meaning
available, they are shown in a dialog
Ready for opera-
window with their serial numbers. Select
tion – no
the required MDG 1.
connection to
Screen changes to "Initializing" view.
computer
Ready for opera-
LED diode (2) above socket glows:
tion – connected to
–
computer via
Bluetooth
Data transfer in
progress
–
Bluetooth connec-
N
tion faulty
The STIHL diagnostic software cannot
recognize the analyzer if the connection
is not correct. If the analyzer is not
recognized:
N
LED (1) glows continuously red: internal
malfunction – replace the analyzer.
LED (2) flashes white: no connection to
computer – check connection.
If no connection between analyzer and
computer has been established up to
this point, continue with "Plugging in and
Continuous blue – ready for
operation – connected to computer
via Bluetooth
Flashes blue – data transfer
Now follow the operating
instructions for the STIHL
diagnostic software – observe
safety precautions in STIHL
diagnostic software during
operation.
B
A
0/
Check that LED (1) glows green
and LED (2) glows continuously
blue.
2
1
MDG 1