Updating Diagnostic Software; Using The Unit - Stihl MDG 1 Gebrauchsanleitung

connecting USB stick manually". Manual
connection is necessary only if
automatic connection fails.
Plugging in and connecting bluetooth
USB stick manually
Plug Bluetooth USB stick into a free
N
USB port.
Open Control Panel and select
N
Bluetooth devices.
In the list, click on add device – this
N
starts the assistant for adding
Bluetooth devices.
Check the box – "Device is installed
N
and can be detected" – click "Next".
Search for Bluetooth devices begins
N
– select STIHL MDG 1 and click
"Next".
Select "Use main code from
N
documentation" – enter main code
STIHL (in capital letters) and click
"Next" – connection is made.
Exit assistant with "Finish".
N
Exit Bluetooth devices with "OK".
N
Interference
Program flow may be interrupted by
electromagnetic interference. In such a
case, close the application and remove
the Bluetooth USB stick. Re-connect the
Bluetooth USB stick and re-start the
application.
MDG 1
Updating Diagnostic
Software
The introduction of new power tools and
additions to diagnostic functions
necessitate a software update. The
update can be performed as described
below.
Direct update via internet
Computer with diagnostic software has
access to internet:
In the menu, click on button "Check for
updates... ". The diagnostic software
checks whether an update is available. If
yes, the update is performed
automatically.
Indirect update (without internet access)
Computer with diagnostic software does
not have access to internet:
Data for updating the diagnostic
software is supplied by the subsidiary.

Using the Unit

STIHL diagnostic software and STIHL
analyzers are designed for analyzing
specific components, troubleshooting
and making adjustments.
Country-specific safety precautions
–
and the safety instructions in the
user manuals must be observed
when the power tool and analyzer
are started.
To reduce the risk of personal injury,
–
do not operate the analyzer if it is
damaged or not properly
assembled.
Use the analyzer only for testing
–
STIHL power tools made in 2000
and later.
Visual inspection – check power tool
–
for external damage.
Look for leaks – if there is fuel
–
leakage, do not start the engine.
Before starting the test, always take
–
precautions to reduce the risk of
accidents and injury from contact
with the power tool's attachment.
Position power tool accordingly and
mount safety devices or
accessories (e.g. cutterless chain) if
necessary.
Use only spark plugs of the type
–
recommended by STIHL.
Connect the analyzer between the
–
spark plug and spark plug boot.
English
19